-
- Sopto Home
-
- Special Topic
-
- Module Knowledge
-
- CWDM and DWDM Transceiver Solution
Module Knowledge
- Tips for Buying 10G XFP Transceivers
- XFP Transceivers for Telecommunications
- Three Types of Ethernet SFP Transceiver Modules Introduction
- Info about High Density CXP Optical Module
- Multipurpose CFP Optical Modules
- Info about CFP Management Interface
- SFP+ Transceivers Short Range Module Overview
- 3 Reasons Every Network Needs GLC-LH-SM Transceiver
- Is the GLC-SX-MM Transceiver Right for Your Switch?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Optic Transceiver Modules can be applied to these occasions or fields.
Ethernet
IPTV
FTTX
Security
Video Monitor
SDH/SONET
Data Communication
Storage Area Networks
SNS Page
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
10G SFP+ Transceiver-180x180.JPG)
10G XENPAK
40G QSFP+ TransceiverPerformance Feature
Stable
Low cost
Small size
Economic
Dust-proof
High speed
Hot-pluggable
Good EMI, EMC
Wide appliaction field
DDM function available
Long transmission distance
Good Anti-static performance
Module Knowledge
Recommended
CWDM and DWDM Transceiver Solution
CWDM DWDM transceiver modules are used as a part of CWDM or DWDM networks to provide high capacity bandwidth across an optical network.
Sopto CWDM transceivers can operate on 9/125 single-mode fiber to 40km or 80km by using special CWDM channels (1270nm to 1610nm, in steps of 20nm). While DWDM transceiver can support a link length of up to 40km or 80km on single-mode fiber by using special DWDM channels. CWDM DWDM transceivers are worked with a variety of network equipment such as switches, routers, and optical transport devices, to link the ports to the fiber optic network.
CWDM DWDM transceiver must comply with SONET/SDH, Gigabit, Fiber Channel and other communication standards. They are available with a variety of different transmitters and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over the available optical fiber link.
Dense Wavelength Division Multiplexing (DWDM) solution includes DWDM XENPAKs which allow integrating WDM transport directly with Cisco 10 Gigabit Ethernet switches and routers. The DWDM XENPAK and DWDM optical filter and amplifier products enable the design of a flexible and highly available multi-service network. The DWDM XENPAKs can be used for un-amplified and amplified designs to transmit up to 320 Gigabit over the same pair of SMF. DWDM GBICs allow to integrating WDM transport directly with Cisco Gigabit Ethernet switches and routers. Similar to DWDM X XENPAK, the DWDM GBICs interoperable with the same ONS equipment, they can be used for un-amplified and amplified designs to transmit up to 32 Gigabit over the same pair of SMF.
Sopto CWDM solution offers a convenient and cost effective solution for the adoption of optical Gigabit Ethernet campus, data center, and metropolitan-area access networks. Our CWDM solutions consist of a set of eight different SFPs, a set of 8 single wavelength/dual channels OADMs, two 4 channels OADM/Mux and an 8 channel CWDM along with a CWDM rack mountable chassis.
CWDM SFP+ module allows enterprises and service providers to offer scalable and easy-to-deploy 10 Gigabit LAN, WAN, and optical transport network service in the network. CWDM 10Gig SFP+ transceivers are 18 center wavelengths available from 1270nm to 1610nm, with each step 20nm.
For purchasing high quality fiber optical transceiver modules with low cost or for more products’ information, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.
You May Like:
 |
 |
 |
 |
| 10G 1270/1330nm 40km WDM BIDI SFP+ Fiber Module | 6.25G 1310nm 10km SFP+ Transceiver | 10G 1260~1620nm 80km CWDM SFP+ Transceiver |
10G 1260~1620nm 80km DWDM SFP+ Optical Transceiver |