- Sopto Home
- Special Topic
- Module Knowledge
- Intro to Cisco Gigabit Ethernet SFP Transceiver Modules
Module Knowledge
- Tips for Buying 10G XFP Transceivers
- XFP Transceivers for Telecommunications
- Three Types of Ethernet SFP Transceiver Modules Introduction
- Info about High Density CXP Optical Module
- Multipurpose CFP Optical Modules
- Info about CFP Management Interface
- SFP+ Transceivers Short Range Module Overview
- 3 Reasons Every Network Needs GLC-LH-SM Transceiver
- Is the GLC-SX-MM Transceiver Right for Your Switch?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Optic Transceiver Modules can be applied to these occasions or fields.
Ethernet
IPTV
FTTX
Security
Video Monitor
SDH/SONET
Data Communication
Storage Area Networks
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Performance Feature
Stable
Low cost
Small size
Economic
Dust-proof
High speed
Hot-pluggable
Good EMI, EMC
Wide appliaction field
DDM function available
Long transmission distance
Good Anti-static performance
Module Knowledge
Recommended
Intro to Cisco Gigabit Ethernet SFP Transceiver Modules
SFP (Small Form-Factor Pluggable) transceiver is a hot swappable I/O device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. Gigabit Ethernet SFP transceivers are designed to use with Gigabit networks. They are compliant to IEEE 802.3 standards and with different types to fit for 1000Base SX, LX/LH, EX and 1000Base-T applications.
It is important to choose a proper Gigabit Ethernet transceiver to act as an interface between the device and the cable. The interconnecting cable can be made of copper or fiber optic. This choice of transceiver is usually made based on the type of fiber optic cable.
622Mbps SFP Optical Transceiver for 80km
Cisco Gigabit Ethernet SFP Transceiver Modules mainly include 1000BASE-T (or GLC-T) SFP, 1000BASE-SX SFP, 1000BASE-LX/LH SFP, 1000BASE-EX SFP, 1000BASE-ZX SFP, 1000BASE-BX10-D and 1000BASE-BX10-U SFP.
1000BASE-T (or GLC-T) SFP: Cisco GLC-T is a copper wire SFP for 1000Base-T applications. The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m length. Cisco 1000BASE-T SFP module supports 10/100/1000 auto-negotiation and Auto MDI/MDIX.
1000BASE-SX SFP: 1000Base-SX SFP supports Multimode fiber only. It operates on 50μm multimode fiber links up to 550m, up to 1km over laser-optimized 50μm multimode fiber cable and on 62.5μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220m.
1000BASE-LX/LH SFP: 1000BASE-LX supports both Multimode and Single-mode fibers. 1000BASE-LX/LH SFP operates on standard single-mode fiber optic link spans of up to 10km and up to 550m on any multimode fibers.
1000BASE-EX SFP: The 1000BASE-EX SFP supports for Single-Mode Fibers. 1000BASE-EX SFP operates on standard single-mode fiber-optic link length up to 40 km. A 5-dB inline optical attenuator should be inserted between the fiber-optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.
1000BASE-ZX SFP: The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 23 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.
1000BASE-BX10-D and 1000BASE-BX10-U SFP: The 1000BASE-BX-D & 1000BASE-BX-U SFPs used for Single-Fiber Bidirectional applications. A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10km.
The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310nm wavelength and receives a 1490nm signal. Wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1310nm and 1490nm light paths, up to 80km or 1000base BX-D BIDI tx1550 rx1490nm 80km in simple.
Above SFP modules are of several versions, where in each version have different values of working wavelength and working distance. Sopto supply all types of Cisco compatible SFP products, they are fully compatible to the products from Cisco or other suppliers with equal price. For the newest quotes, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com. For more info, please browse our website.
You May Like: