- Sopto Home
- Special Topic
- Patch Cord Knowledge
- OS1 Simplex Patch Cord Patch Cords Characteristics
Patch Cord Knowledge
- Fiber Optic Connector Ferrule Design
- Fiber Optic Connector Design
- E2000 to ST Fiber Patch Cable Overview
- Acceptable and Unacceptable Fiber Connector End-Face Finishes
- Using Wipes and Cleaning Cassettes to Clean Fiber Patch Cords
- Not-Too-Tight Mating of Fiber Optic Connectors
- Matching Gel and Oils Contamination about Fiber Optic Connectors
- The Effect of Improper Use of Fiber Optic Connectors
- Why Fiber Optic Connectors are Fragile?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Patch Cords have a widely application. Where the need for the optical fiber connection, where you need fiber optic patch cords.
Testing Equipment
FTTX+ LAN
Optical Fiber CATV
Optical Communication System
Telecommunication
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Good Water-proof
Low insertion loss;
low reflection loss;
Stability, good repeatability;
High-precision ceramic ferrule;
Compatible with NTT standard;
Precision Grinding and fully testing;
Compliance with international standards
Patch Cord Knowledge
Recommended
OS1 Simplex Patch Cord Patch Cords Characteristics
Larger diameter multimode fiber, different wavelengths and phase of the beam reflected along the fiber wall kept forward transmission, resulting in dispersion, limits the transmission between the two repeaters distance and bandwidth, the bandwidth of multimode fiber is about 2.5Gbps.
Smaller diameter single-mode fiber, the light in which the straight lines, very few reflections patch cords and pigtails will include laser optimized OM3 fiber, OM2, OM1 and SC TO LC, OS1 Simplex Patch Cord tight-buffered fiber or 1.6mm simplex or duplex zip-cord jacketed cable. Jacketed cable shall be compliant with UL1666 (OFNR) or NFPA 262 (OFNP) flare ratings.
Spot wires and pigtails shall be RoHS compliant and will meet or exceed requirements of TIA/EIA-568-B. 3. The fiber connectors will exceed the prerequisites of TIA/EIA-455-21A for 500 mating series.
Sopto offers the OS1 Simplex Patch Cord cables are with MU fiber optic connectors. Its internal control diameter used a high-density ceramic ferrule to avoid damage to the transmission performance and transceiver devices.
FC/APC FC/APC 9/125 OS1 We supply the patch cord fully compatible RoHS, IEC, Telcordia and GR-326-CORE Standard. Single mode 9/125 OS1 patch leads for internal connections within cabinets between fiber patch panels and active equipment (Hubs, Switches, media converters, Routers etc). OS1 Simplex Patch Cord can also be used between workstation and fibre wall outlet, where 50/125 OM2 Multi Mode cable has been used in the infrastructure.
For more Fiber Optical Ethernet Products, please browse our website or contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.