- Sopto Home
- Special Topic
- Module Knowledge
- Fiber Optic Transceiver Purchasing Notes
Module Knowledge
- Tips for Buying 10G XFP Transceivers
- XFP Transceivers for Telecommunications
- Three Types of Ethernet SFP Transceiver Modules Introduction
- Info about High Density CXP Optical Module
- Multipurpose CFP Optical Modules
- Info about CFP Management Interface
- SFP+ Transceivers Short Range Module Overview
- 3 Reasons Every Network Needs GLC-LH-SM Transceiver
- Is the GLC-SX-MM Transceiver Right for Your Switch?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Optic Transceiver Modules can be applied to these occasions or fields.
Ethernet
IPTV
FTTX
Security
Video Monitor
SDH/SONET
Data Communication
Storage Area Networks
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Performance Feature
Stable
Low cost
Small size
Economic
Dust-proof
High speed
Hot-pluggable
Good EMI, EMC
Wide appliaction field
DDM function available
Long transmission distance
Good Anti-static performance
Module Knowledge
Recommended
Fiber Optic Transceiver Purchasing Notes
Fiber optic transceivers have a variety of different classification, while most of the actual use note is the distinction between the categories according to different fiber optic connectors: SC connector fiber optic transceivers and FC / ST connector fiber optic transceiver. Connect different devices using fiber optic transceivers, must pay attention to the use of the port.
1. Fiber optic transceiver connection to 100BASE-TX devices (switches, hubs):Verify that the maximum length of twisted pair does not exceed 100 meters; to the fiber-optic transceiver connected to one end of the twisted pair RJ-45 port (Uplink port), the other end of the RJ-45 port 100BASE-TX set (switches, hubs) (general population).
10G 1310nm 220m SFP+ Transceiver
2. Fiber optic transceiver connection to 100BASE-TX device (NIC): Verify that the maximum length of twisted pair does not exceed 100 meters; Connect one end of the twisted pair to fiber optic transceiver RJ-45 port (100BASE-TX port), and the other end to the RJ-45 port of the network card.
3. Fiber optic transceiver connected to 100BASE-FX:Recognized that the fiber does not exceed the length of the distance range of the equipment can provide; SC/ST connector 100BASE-FX fiber connect one end of the fiber optic transceivers SC / FC / ST connector, connect the other end equipment. Also need to add a lot of users in the use of fiber optic transceivers that: as long as the length of the optical fiber in the single-mode fiber or multimode fiber can support a maximum distance you can normally use. In fact, this is a wrong perception, this understanding is correct only when connected devices are full-duplex devices, when there are half-duplex devices, optical fiber transmission distance there is a certain limit
For purchasing high quality fiber optic transceivers with low cost or for more products’ information, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.