- Sopto Home
- Special Topic
- Patch Cord Knowledge
- Why Develop Optical Fiber Connectors?
Patch Cord Knowledge
- Fiber Optic Connector Ferrule Design
- Fiber Optic Connector Design
- E2000 to ST Fiber Patch Cable Overview
- Acceptable and Unacceptable Fiber Connector End-Face Finishes
- Using Wipes and Cleaning Cassettes to Clean Fiber Patch Cords
- Not-Too-Tight Mating of Fiber Optic Connectors
- Matching Gel and Oils Contamination about Fiber Optic Connectors
- The Effect of Improper Use of Fiber Optic Connectors
- Why Fiber Optic Connectors are Fragile?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Patch Cords have a widely application. Where the need for the optical fiber connection, where you need fiber optic patch cords.
Testing Equipment
FTTX+ LAN
Optical Fiber CATV
Optical Communication System
Telecommunication
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Good Water-proof
Low insertion loss;
low reflection loss;
Stability, good repeatability;
High-precision ceramic ferrule;
Compatible with NTT standard;
Precision Grinding and fully testing;
Compliance with international standards
Patch Cord Knowledge
Recommended
Why Develop Optical Fiber Connectors?
The main purpose of the optical fiber connector is for the fiber splice. Now, optical fiber connectors are widely used in optical fiber communication systems in the optical connector, its variety of different structures. Fiber optic connectors in a certain extent, also affects the reliability and the performance of the fiber optic transmission system.
Someone knows that the connector types, but I will tell you here, because I am not sure if you are unknown. Connector structure can be divided into: FC SC, ST, LC, D4, DIN, MU, and the MT and so on in various forms.
The ST Connector is still the most popular multimode connector because it is cheap and easy to install. The SC connector was specified as a standard by the old EIA/TIA 568A specification, but its higher cost and difficulty of installation (until recently) has limited its popularity. However, newer SCs are much better in both cost and installation ease, so it has been growing in use.
The duplex FDDI, ESCON and SC connectors are used for patch cords to equipment and can be mated to ST or SC connectors at wall outlets. Single mode networks use FC or SC connectors in about the same proportion as ST and SC in multimode installations. There are some D4s out there too. EIA/TIA 568 B allows any fiber optic connector as long as it has a FOCIS (Fiber Optic Connector Intermateability Standard) document behind it.
This opened the way to the use of several new connectors, which we call the “Small Form Factor” (SFF) connectors, including AT&T LC, the MT-RJ, the Panduit “Opti-Jack,” 3M’s Volition, the E2000/LX-5 and MU. The LC has been particularly successful in the US.
Connector Termination Styles mainly include 5 types, they are:
- Epoxy/Polish Connectors
- Anaerobic Adhesive/Polish Connectors
- UV Adhesive/Polish Connectors
- Crimp/Polish Connectors
- Quick Termination (Pre-Terminated) Connectors
For more products’ information, please browse our website or contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.