-
- Sopto Home
-
- Special Topic
-
- Patch Cord Knowledge
-
- Fiber Optic Connector Termination Types
Patch Cord Knowledge
- Fiber Optic Connector Ferrule Design
- Fiber Optic Connector Design
- E2000 to ST Fiber Patch Cable Overview
- Acceptable and Unacceptable Fiber Connector End-Face Finishes
- Using Wipes and Cleaning Cassettes to Clean Fiber Patch Cords
- Not-Too-Tight Mating of Fiber Optic Connectors
- Matching Gel and Oils Contamination about Fiber Optic Connectors
- The Effect of Improper Use of Fiber Optic Connectors
- Why Fiber Optic Connectors are Fragile?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Patch Cords have a widely application. Where the need for the optical fiber connection, where you need fiber optic patch cords.
Testing Equipment
FTTX+ LAN
Optical Fiber CATV
Optical Communication System
Telecommunication
SNS Page
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Good Water-proof
Low insertion loss;
low reflection loss;
Stability, good repeatability;
High-precision ceramic ferrule;
Compatible with NTT standard;
Precision Grinding and fully testing;
Compliance with international standards
Patch Cord Knowledge
Recommended
Fiber Optic Connector Termination Types
Here we intro 4 types of fiber optic connector termination, which includes Anaerobic Adhesive, Epoxy/Polish, Crimp/Polish and Pre-Polished.
Anaerobic Adhesive
Anaerobic adhesive connectors use a quick setting adhesive. They work well if your technique is repeatable, but often they do not have the wide temperature range of epoxies, so they are only used indoors. Thus, generally used for factory terminations only.
Adhesive/Polish Connectors
Epoxy/Polish
These connectors are the simple “epoxy/polish” type where the fiber is glued into the connector with epoxy and the end polished with special polishing film. These provide a very reliable connection with low losses. They can be factory or field installed.
Epoxy/Polish Termination
Crimp/Polish
Rather than glue the fiber in the connector, these connectors use a crimp on the fiber to hold it in. Early types offered “iffy” performance, but today they are pretty good, if you practice a lot. Expect to trade higher losses for the faster termination speed. And they are more costly than epoxy polish types.
Pre-Polished
Many manufacturers offer connectors that have a short stub fiber already epoxied into the ferrule and polished perfectly, so you just cleave a fiber and insert it like a splice. While it sounds like a great idea, it has several downsides. First it is very costly, 2 to 3 times as much as an epoxy polish type. Second, you have to make a good cleave to make them low loss.
Sopto supplies high quality fiber optic patch cords and network patch cables. For the newest quotes, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com. For more info, please browse our website.