Connecting the world with professional
Fiber Optic Solutions

fiber optic transceiver special topic

Certificate

FCC

 

CE

 

ROHS

Guarantee

Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...

Return Policies

Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....

Applications

An Ethernet to Fiber Media Converter can also be used where there is high level of electromagnetic interference or EMI which is a common phenomenon found in industrial plants. This interference can cause corruption of data over copper-based ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise. An Ethernet to Fiber Optic Converter therefore enables you to inter-connect your copper-ethernet devices over fiber ensuring optimal data transmission across the plant floor.

Optical fiber media converter work

SNS Page

  • sopto facebook
  • sopto twitter
  • sopto linkedin

Using Attention of Fiber Media Converter

 

Fiber media converter has a variety of different classification, but note that most of the actual use of class distinction according to different fiber optic connectors, including SC connector media converter and FC / ST media converter.

 

SFP Slot Fiber Media Converter and SFP Transceiver

SFP Slot Fiber Media Converter and SFP Transceiver

 

Fiber media converter to connect the different devices must use different ports.

 

1. The fiber converter to 100BASE-TX equipment (switches, hubs) connection: 

Verify that the length of twisted pair up to over 100 m; RJ-45 port to connect one end of the twisted pair to fiber converter (Uplink port), the other end of the set (switches, hubs) 100BASE-TX RJ-45 port (port).

 

2. The fiber converter to 100BASE-TX device (NIC) connections: 

Verify that the length of twisted pair up to over 100 m; RJ-45 port to connect one end of the twisted pair to Fiber media converters (100BASE-TX port), the other end of the RJ-45 port, network card.

 

3. Fiber converter to 100BASE-FX connection:

Verify that the fiber length does not exceed the range of equipment to provide distance; SC / ST connector, one end of the fiber with fiber media converters SC / FC / ST connector on one end to connect the 100BASE-FX device.

 

Also need to add is that many users in the use of fiber media converters that: as long as the length of the fiber is in the single-mode fiber or multimode fiber can support a maximum distance can be used normally. In fact, this is a wrong perception, this understanding is correct only when connected devices are full-duplex device, when there are half-duplex device, the optical fiber transmission distance there are certain restrictions.

 
 

Related Knowledge:

E1 to V.35 or V.24 Converter

Remote Ethernet Media Converter

Why Protocol Converter Is Helpful?

Common Problem of Fiber Media Converter

Advantages of Media Conversion Technology