1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter

As more and more PoE PD devices need higher power input and long-distance transmission, we have released a new Power over Ethernet Media Converter, 1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter. With the brand-new IEEE 802.3at High Power over Ethernet technology applied, the 1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter provides the following key features:

　　■ IEEE 802.3at / IEEE 802.3af PoE standard compliance

　　■ Supports a maximum of 30W output power

　　■ 10/100/1000Mbps duplex mode supports on 1000Base-T port

　　■ 1000Mbps Fiber-Optic support

The 1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter is a Single-Port, Mid-Span IEEE 802.3at High Power over Ethernet converter designed specifically to satisfy the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. The 1000Base-X to 10/100/1000Base-T 802.3at High Power over Ethernet converter is an ideal solution to delivering data and power to network devices directly via the RJ-45 Port interface without the need for installing extra power outlets and electrical cabling.

PD Media Converter

The maximum distance between the PoE PSE and PD is 100 meters. To extend the network device deployment range, the 1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter is integrated with Fiber interface. The 1000Base-X to 10/100/1000Base-T 802.3at PoE+ Media Converter is used to convert optical Ethernet signal to electrical Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively. It can convert 10/100/1000Base-T signal to 1000Base-X one and provide the diverse options of fiber connecting types to meet different network applications.

The 1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter and its fiber connecting type includes:

　　■ GTP-802:SC Fiber Interface with Multi-mode, Distance up to 220m and 550m

　　■ GTP-802S:SC Fiber Interface with Single-mode, Distance up to 10km

　　■ GTP-805A:LC Fiber Interface, supports Multi / Single Mode SFP module, Distance up to 120km max. (Varting on SFP module)

With the long Fiber distance support, it still sustains the transmission performance as high as 1000Mbps. It works in high performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x Flow Control (Full-Duplex) and the LFP (Link Fault Pass through function) (LLCF/LLR) with the DIP Switch design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitoring the network power usage.

The 1000Base-X to 10/100/1000Base-T 802.3at PoE Media Converter provides DC 52V power over Ethernet cables -- just insert DC voltage into Cat.5/5e/6 cable, allowing the cable between the PoE splitters (POE-151S / POE-152S / POE-161S) to transfer data and power simultaneously for up to 100 meters.

Then it will split the digital data and the power into two selectable DC outputs (5VDC / 12VDC). Thus, it reduces cables and the dedicated electrical outlets on the wall, ceiling or any unreachable place. Most of all, it also eliminates the time for installation. The high Power over Ethernet solution frees the security IP camera and wireless AP deployment from restrictions of power outlet locations.

For more information, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.