-
- Sopto Home
-
- Special Topic
-
- Patch Cord Knowledge
-
- Using Fiber Terminators to Terminator without Fiber Connector Po
Patch Cord Knowledge
- Fiber Optic Connector Ferrule Design
- Fiber Optic Connector Design
- E2000 to ST Fiber Patch Cable Overview
- Acceptable and Unacceptable Fiber Connector End-Face Finishes
- Using Wipes and Cleaning Cassettes to Clean Fiber Patch Cords
- Not-Too-Tight Mating of Fiber Optic Connectors
- Matching Gel and Oils Contamination about Fiber Optic Connectors
- The Effect of Improper Use of Fiber Optic Connectors
- Why Fiber Optic Connectors are Fragile?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Patch Cords have a widely application. Where the need for the optical fiber connection, where you need fiber optic patch cords.
Testing Equipment
FTTX+ LAN
Optical Fiber CATV
Optical Communication System
Telecommunication
SNS Page
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Good Water-proof
Low insertion loss;
low reflection loss;
Stability, good repeatability;
High-precision ceramic ferrule;
Compatible with NTT standard;
Precision Grinding and fully testing;
Compliance with international standards
Patch Cord Knowledge
Recommended
Using Fiber Terminators to Terminator without Fiber Connector Ports
With the rapid deployment of high speed fiber multiplexer, the possibility of having an un-terminated derived channel or branch increases. The single fiber connector mated to an unused adapter or coupling is the source of back-reflection. The fiber optic terminator is usually used to terminate the unused fiber connector ports in fiber optic systems.
Such unused ports will create unwanted return loss and degrade the whole network performance. Fiber optic terminators are passive components that can absorb light coming from the un-terminated connector plugs and reduce signal degradation in digital and analog systems.
Fiber optic terminators are designed to reduce back-reflections, which is typically found on laser-activated, connectorized access points such as those found on splitters, DWDM’s or fiber distribution frames, are functional devices using Metal-Ion Doped Fibers. By using these fibers, optical terminators can convert the optical power into heat and the power is attenuated inside the devices. The structures of the plug type optical terminators are simple and the power-proof and performance stability is superior.
The fiber optic terminators also maintain the cleanliness of un-terminated plugs and protect them from possible physical damage. The plug type optical terminators are used to terminate dark fiber port on the fiber optic component. Their ceramic ferrule is polished with an angled or non-angled end face to reduce unwanted reflections from open ports. These optical terminators also provide improved personal safety over termination methods.
Sopto provides all types of optical fiber terminators including SC, FC, ST, LC and MU type connector with high precision ceramic ferrule. They can be easily plugged into the systems to significantly reduce reflections from the fiber face, they can also be used with fiber adapters at the male plug end. Besides, Sopto also provide the mechanical fiber optic termination tools such including fiber optic crimp tool to crimp or connect a connector to the end of a fiber optic cable.
For purchasing high quality patch cords with low cost or for more products’ information, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.