- Sopto Home
- Special Topic
- Patch Cord Knowledge
- How to Take Care of Fiber Optic Connectors?
Patch Cord Knowledge
- Fiber Optic Connector Ferrule Design
- Fiber Optic Connector Design
- E2000 to ST Fiber Patch Cable Overview
- Acceptable and Unacceptable Fiber Connector End-Face Finishes
- Using Wipes and Cleaning Cassettes to Clean Fiber Patch Cords
- Not-Too-Tight Mating of Fiber Optic Connectors
- Matching Gel and Oils Contamination about Fiber Optic Connectors
- The Effect of Improper Use of Fiber Optic Connectors
- Why Fiber Optic Connectors are Fragile?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Patch Cords have a widely application. Where the need for the optical fiber connection, where you need fiber optic patch cords.
Testing Equipment
FTTX+ LAN
Optical Fiber CATV
Optical Communication System
Telecommunication
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Good Water-proof
Low insertion loss;
low reflection loss;
Stability, good repeatability;
High-precision ceramic ferrule;
Compatible with NTT standard;
Precision Grinding and fully testing;
Compliance with international standards
Patch Cord Knowledge
Recommended
How to Take Care of Fiber Optic Connectors?
How to Take Care of Fiber Optic Connectors? The key is to keep them clean. It is hard to conceive of the size of a fiber optic connector core. Single mode fibers have cores that are only 8~9um in diameter. As a point of reference, a typical human air is 50~75um in diameter, approximately 6-9 times larger.
Dust particles can be 20um or larger in diameter. Dust particles smaller than 1um can be suspended almost indefinitely in the air. A 1um dust particle landing on the core of single mode fiber can cause up to 1dB of loss. Larger dust particles, 9um or larger, can completely block the core of a single mode fiber. Such that fiber optic connectors have to be cleaned each time they are mated. It is essential that fiber optics users develop the necessary discipline to always clean the connectors before they are mated.
The other important thing to keep in mind is that you need to cover a fiber optic connector when it is not in use. Unprotected connector ends are most often damaged by impact, such as hitting the floor. Most connector manufacturers provide some sort of protection boot. The best protectors cover the entire connector end, but they are generally simple closed-end plastic tubes that fit snugly over the ferrule only.
These boots will protect the connector’s polished ferrule end from impact damage that might crack or chip the polished surface. Many of the tight fitting plastic tubes contain jelly-like contamination (most likely mold release) that adheres to the sides of the ferrule. A blast of cleaning air or a quick dunk in a alcohol will not remove this residue.
This jelly-like residue can combine with common dirt to form a sticky mess that causes the connector ferrule to stick in the mating adapter. Often, the stuck ferrule will break off as one attempts to remove it, so always thoroughly clean the connector before mating, even if it was cleaned previously before the protection boot was installed.
As the professional fiber optic patch cables provider, we supply a range of optical patch cord, such as LC fiber cable, ST fiber cable, MTP MPO cable, LC SC patch cord and more. If you would like to purchase our optical patch cables, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com. For more info, please browse our website.