- Sopto Home
- Special Topic
- Patch Cord Knowledge
- Fiber Optic Patch Cords and DWDM SFP Transceivers
Patch Cord Knowledge
- Fiber Optic Connector Ferrule Design
- Fiber Optic Connector Design
- E2000 to ST Fiber Patch Cable Overview
- Acceptable and Unacceptable Fiber Connector End-Face Finishes
- Using Wipes and Cleaning Cassettes to Clean Fiber Patch Cords
- Not-Too-Tight Mating of Fiber Optic Connectors
- Matching Gel and Oils Contamination about Fiber Optic Connectors
- The Effect of Improper Use of Fiber Optic Connectors
- Why Fiber Optic Connectors are Fragile?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Fiber Patch Cords have a widely application. Where the need for the optical fiber connection, where you need fiber optic patch cords.
Testing Equipment
FTTX+ LAN
Optical Fiber CATV
Optical Communication System
Telecommunication
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Good Water-proof
Low insertion loss;
low reflection loss;
Stability, good repeatability;
High-precision ceramic ferrule;
Compatible with NTT standard;
Precision Grinding and fully testing;
Compliance with international standards
Patch Cord Knowledge
Recommended
Fiber Optic Patch Cords and DWDM SFP Transceivers
Fiber Patch Cable also known as fiber jumper or fiber patch cord, which is a fiber optic cable terminated with fiber optic connectors on both ends.
There are two major application areas of Fiber Patch Cable: computer work station to outlet and fiber optic patch panels or optical cross connect distribution center. Fiber optic patch cables are for indoor applications only. Single-mode fiber Patch cable is primarily used for applications involving extensive distances. Multimode fiber optic patch cord, however, is the cable of choice for most common local fiber systems as the devices for multimode are far cheaper.
Dense Wavelength Division Multiplexing (DWDM) Small Form-Factor Pluggable (SFP) is available in all 100 GHz C-band wavelengths on the DWDM ITU grid. They are designed to Multi-Source Agreement (MSA) standards to ensure broad network equipment compatibility. As multi-rate interfaces they support any protocol from 100 Mbps to 4.25Gbps.
DWDM SFP transceivers provide the high speeds and physical compactness that today’s networks require while delivering the deployment flexibility and inventory control that network administrators’ demand. The 1.25G DWDM SFP transceivers are small form factor pluggable modules for bi-directional serial optical data communications such as 4x/2x/1x Fibre Channel, SDH/SONET and Ethernet applications. We supply 1.25G DWDM SFP modules are hot pluggable and digital diagnostic functions are available via an I2C serial bus specified in the SFP MSA SFF-8472.
The DWDM SFP transceiver has undergone rigorous qualification and certification testing to provide End-to-End Compatibility using switching equipment from CISCO, BROCADE, JUNIPER, ALCATEL, HP (select models), NORTEL, EMC, QLOGIC and other OEMs.
Sopto is professional in manufacturing and providing high quality fiber optic patch cords and fiber optic transceivers. For the newest quotes information, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.