- Sopto Home
- Special Topic
- Multiplexer Knowledge
- Kinds of UTP Video Baluns
Multiplexer Knowledge
- Why is Multiplexing Needed in Data Communication Systems?
- What is Concept of Multiplexing in Telephone System?
- What is Digital TV Frequency?
- Outlook of the WDM Networks
- DWDM Technical Overview
- CWDM Technical Overview
- How to Activate Cable Modems?
- How to Install a Fiber Optic Modem?
- How do I Choose a Best Fiber Modem?
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Multiplexers can be used to connect PBX, Hot line and other devices of network from central site to user site through fiber optical cable.
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
High integration desig
Low power consumption
Good EMC, EMI
Stable and Reliable
Multiplexer Knowledge
Recommended
Kinds of UTP Video Baluns
Generally, UTP video balun classified passive and active video balun the two specifications. Passive video balun is a converter which only converts the signal in balance/imbalance, no need power supply. But Active video transceiver requires power supply, is not only a transceiver, but also a signal-amplifier.
1. Passive UTP video balun, no power supply.
Essentially, it is a video mutual inductance coil which parallel circled 120 turns by 0.15mm enameled wire-wire on a high-flux and high bandwidth magnetic ring. Then, the coil is soldered to the circuit board to protect the stability and reliability of the circuit, built-in transient suppression protection.
Passive video balun is only convert the signal in balance/imbalance status, as a passive device, it does not bring new distortion, not produce noise, only have a little signal attenuation. Super Cat5 twisted pair which diameter greater than 0.5mm is recommended to use. In laboratory testing, using UTP matches passive transceiver and passive receiver, the transmission distances is up to 300m. And using combined passive balun and active balun, it is up to 1500m.
Classified by transmission channel, there are 1ch passive video balun; 4ch passive video balun; 8ch passive video balun; 16ch passive video balun and 32ch passive video balun.
2. Active UTP video balun, need power supply.
Regarding the signal attenuation in UTP transmission, especially high-frequency signals, active video transceiver designed to connect a power supply, using the active signal amplifier to make the signal pre-lift and recovery, to have signal amplification and compensation effect. It has brightness & sharpness control function, can been adjusted according to the actual situation, to ensure the image in the monitor is clear and natural.
It even could transmit power and data besides video. After laboratory tests, using combined active balun and passive balun in video signal transmission project, the transmitter distance up to 1500 meters. The distance even could up to 2400m when using both active transceiver and receiver. In practical wiring application, it will be affected by many external factors, so you must be patient and debugging.
Classified by transmission channel, there are 1ch active video balun; 4ch active video balun; 8ch active video balun and 16ch active video balun.
3. Multiple UTP video transceivers which transmit VIDEO, POWER, DATA and AUDIO simultaneously.
The Power-Video-Audio/Data signals are routed via UTP and RJ45. The unit is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP).
For more info, please browse our website. For purchasing high quality UTP Video Baluns with low cost, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com.