-
- Sopto Home
-
- Special Topic
-
- Twinax Cable Knowledge
-
- Copper Cable and Fiber Cable in Data Center
Twinax Cable Knowledge
- Cable Labeling as Part of Data Center Management
- How to Correctly Run cables On Servers in a Data Center?
- 4 Realities You Should Consider 10G Ethernet for Your Business
- Is it finally the end of copper?
- Why We Need Both 40G and 100G Ethernet Cable?
- What is Twisted Pair Cable?
- Benefits of Twisted Pair Cable Construction
- Why Copper Is Used in Cables?
- A Brief Look at Ethernet Cable Construction
SOPTO Special Topic
Certificate
Guarantee
Except products belongs to Bargain Shop section, all products are warranted by SOPTO only to purchasers for resale or for use in business or original equipment manufacturer, against defects in workmanship or materials under normal use (consumables, normal tear and wear excluded) for one year after date of purchase from SOPTO, unless otherwise stated...
Return Policies
Defective products will be accepted for exchange, at our discretion, within 14 days from receipt. Buyer might be requested to return the defective products to SOPTO for verification or authorized service location, as SOPTO designated, shipping costs prepaid. .....
Applications
Twinax Cables are mainly used with PCI or PCI-E Card for the short distance interconnection in the server room.
SNS Page
SOPTO Products
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
Related Products
Performance Feature
Stable Transmission Speed
Reliable Transmission
Various Length Selection
Wider Operating Temperature
Good for HPC
Good for Data Center
Twinax Cable Knowledge
Recommended
Copper Cable and Fiber Cable in Data Center
Structured cabling system DPC (Data Center) should support the work of various applications, including those that are only planned to use in the future. Speed in data centers is increasing due to the use of server virtualization technology and the use of this technology leads to an increase in requirements for the cable system.
Using an optical cable in data centers is primarily due to the fact that a large number of reliable and working technologies and solutions that use as a medium for data transmission single mode and multimode fiber, the transmission of large information flows and the distance, is much more than it can reach copper cables, like 10M CX4 Cables.
Optical cables have no problems with EMC and crosstalk occurring between the twisted pairs and copper cables, which make use of copper cables in data centers.
QSFP+ Passive or Active Cables
The diameter of the optical cable is less than copper and it allows the use of cable channels for the optical cable of smaller sections, which allows better use of space in data center, reduce the costs of cable channels.
Also reduces the load on the mount cable channel. Using an optical cable increases the efficiency of the cooling system: optical cable run cool, creates fewer obstacles when placing cable channels under the raised floor, electric power consumption of the active ports of equipment on the optics, copper below.
A well-designed cabling in data center allows the owner of the data center to solve the problem of scaling data center, with no problems in connecting with a new network and equipment storage. And to solve the problem of scaling the data center without using an optical cable is impossible.
Sopto supplies high quality copper cables, like SFP+ Twinax Cables, XFP to XFP Cables and so on with reasonable price for data centers applications. For the newest quotes, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com. For more info, please browse our website.