What kind cables can you provides?

Normally, customers require PVC and LSZH optical fiber patch cables types specified

They are G652D single-mode cables, 50/125 or 62.5/125 for multi-mode type, G657A for Single-mode LSZH type patch cords, MM OM3 (50/125) for 10G multi-mode Cables. OFNR and OFNP are available. Sopto Tech can provide different connector of the patch cord.

G.652D and G.657A fiber

G.657A fiber is standard defined by ITU (International Telecommunication Union). G.657A and G.652D fiber are single mode fibers. The difference between G.652D and G.657A fiber is the bending radius. G.657A1 fiber’s bending radius is 10mm, G.657A2 is 7.5mm and G.657A3 is 5mm. G. 657 fibers is better than G.652D, which a little expensive than the G.652 fibers.

LSZH Cables

LSZH stands for Low Smoke Zero Halogen and describes a cable jacket material that is non-halogenated and flame retardant. Low smoke zero halogen cable reduces the amount of toxic and corrosive gas emitted during combustion. LSZH cable jacketing is composed of thermoplastic or thermoset compounds that emit limited smoke and no halogen when exposed to high sources of heat, e.g. flame. The LSZH Cables become more and more popular in the FTTx project recently.

Indoor 2 cores FTTH drop cable

According to the different requirements, we provide GJXFH, GJXH, GJXFCH, GJXFDH, GJXDH etc. such fiber cables. After you choose the structure of the cable, you also need to confirm the material of strength member, the Sheath, and even the fiber type. Different material will affect the cost of the fiber cable.

We also provides high speed cables like QSFP+ AOC cable

QSFP+ AOC (Active optic cable) is one of our main products; usually this active optic cable can be used in following areas: 40G Ethernet (40GbE), InfiniBand QDR, 8x Fibre Channel, SAS/SATA, PCIe3 and Proprietary High Speed Interconnections.