Outdoor Non-metallic Armored Cable

The fibres, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of Fibre Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath… [Details]

Characteristics

1. Accurate fibre excess length ensures a good performance of tensile strength and temperature.
2. High strength loose tube that is hydrolysis resistant and special tube filling compound to ensure a critical protection of fibre
3. Crush resistance and flexibility

The following measures are taken to ensure the cable watertight:

1. Single Fibre Reinforced Plastic as the central strength member
2. Loose tube filling compound
3. 100% cable core filling
4. APL moisture barrier
5. PSP enhancing moisture-proof Water-blocking material

Application

1. Adopted to Outdoor distribution
2. Suitable for aerial pipeline laying method       
3. Long distance and local area network communication