- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
- OM3 Fiber Patch Cord
- Outdoor Waterproof Fiber Opt...
- Outdoor Water-blocking Roade...
- Outdoor Slotted-Core Fiber O...
- Outdoor Single Mode Figure 8...
- Outdoor Non-metallic Armored...
- Outdoor Loose Tube Optical C...
- Outdoor GYTA Optical Cable
- Outdoor Figure 8 Leaper Cabl...
- Outdoor Drainage Pipeline Ca...
- Outdoor Direct Buried Fiber ...
- Outdoor Direct Buried Double...
- Outdoor All Dielectric Self-...
- Outdoor GYTS Loose Tube Opti...
- Indoor Self-Supporting Drop ...
- Indoor Fiber Ribbon Drop Cab...
- Indoor Duct Water-Blocking D...
- Outdoor Small Diameter Air B...
- Indoor Bow-type Drop Cable
- Maintained Methods of Fusion...
Three Types of Ethernet SFP Transceiver Modules Introduction
Three Types of Ethernet SFP Transceiver Modules Introduction
In the market, there are a range of Ethernet SFP transceiver modules, including Fast Ethernet (FE) SFP, Gigabit Ethernet (GE) SFP and 10 Gigabit Ethernet (10GbE) SFP Plus (SFP+). These small, modular optical interface transceivers offer a convenient and cost effective solution for the adoption of GE and FC in data center, campus, metropolitan area access and ring networks, and storage area networks.
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 155Mbps and 2km transmission distance with MMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.
Features of FE SFP Module
- Data-rate of 155Mbps operation
- 1310nm/1550nm FP laser transmission
- Transfer distance 2 to 160km
- Hot-pluggable SFP footprint duplex LC connector Interface
- Class 1 FDA and IEC60825-1 laser safety compliant
- Compatible with SFP MSA
- Compatible with SFF-8472
Features of GE SFP Module
- Compliant with IEEE 802.3z
- Differential LVPECL inputs and outputs
- Single 3.3 V power supply
- TTL signal detect indicator
- Hot pluggable
- Class 1 laser product, complies with EN60825-1
- One GE Port
- Duplex LC Connector or Simplex LC Connector
Features of GE Copper SFP Module
- Compliant with SFP MSA and IEEE Std 802.3-2002
- Supports 1000BASE-T operation in host systems
- Hot-pluggable SFP footprint
- Compact RJ-45 connector assembly
- TTL signal detection (Supports RX_LOS as link indication function)
- RoHS compliant and lead free
- For 100m reach over Cat 5 UTP cable
- Fully metallic enclosure for low EMI
- Low power dissipation (1.05 W typical)
- Detailed product information in EEPROM
- One GE Port
Sopto supply high quality fiber optical transceivers, like 2.125G 1310nm 10km SM DDM SFP Transceiver Module and 4.25G 1310nm SFP Optical Transceiver, besides these three SFP optical transceiver with lower price. For the newest quotes, please contact a Sopto representative by calling 86-755-36946668, or by sending an email to info@sopto.com. For more info, please browse our website.
You May Like:






