- Sopto Home
-
- SPT-2CXXTG-80D 10G CWDM X2 ZR Transponder
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
SPT-2CXXTG-80D 10G CWDM X2 ZR Transponder

SPT-2CXXTG-80D
10Gb/s CWDM X2 ZR Transponder
Features
- X2 MSA Compliant
- 70-PIN connector
- SC duplex receptacle package
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- Cooled EA-DFB/APD-PD
- 1470nm~1570nm link length up to 80km (1600ps/nm)
- 1590nm~1610nm link length up to 70km (1400ps/nm)
- Power supply: +5.0 V, +3.3 V, APS:+1.2 V
- Power Dissipation 4W Maximum
- 0ºC to 70ºC Operating Case Temperature
- Digital Diagnostic Monitoring
- Management and control with MDIO 2-wire bus
- XAUI electrical interface 4 x 3.125 Gb/s Ethernet
- RoHS6 compliant and lead free
Applications
- 10 Gb/s Ethernet transmission systems
Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Supply Voltage+5V |
Vcc5 |
|
6.0 |
V |
Supply Voltage_3.3V |
Vcc3 |
|
4 |
V |
Supply Voltage APS |
Vaps |
|
2 |
V |
Storage Temperature |
Tst |
-20 |
85 |
ºC |
Optical Input Received Power |
PIN |
- |
-7 |
dBm |
Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Operating Case temperature |
Tca |
0 |
- |
70 |
ºC |
Supply Voltage+5V |
Vcc5 |
4.75 |
5 |
5.25 |
V |
Supply Current+5V |
Icc5 |
|
|
500 |
mA |
Supply Voltage_3.3V |
VCC3 |
3.14 |
3.3 |
3.47 |
V |
Supply Current+3.3V |
Icc3 |
|
|
1000 |
mA |
Supply Voltage APS |
Vaps |
1.14 |
1.2 |
1.26 |
V |
Supply Current APS |
Iaps |
|
|
1100 |
mA |
Module Power Dissipation |
Pm |
- |
|
4 |
W |
Transmitter Specifications –Optical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Center Wavelength |
λc |
1464.5 |
|
1617.5 |
nm |
Center wavelength stability |
∆λD |
−6.5 |
λc |
6.5 |
nm |
Optical Transmit Power |
Po |
0 |
|
4 |
dBm |
Optical Transmit Power (disabled) |
Ptx-dis |
- |
- |
-40 |
dBm |
Extinction Ratio |
ER |
9 |
|
- |
dB |
Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
Eye Mask |
IEEE 802.3ae Compliant |
Transmitter Specifications – Electrical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Data Rate (TXLINE0-3) |
TX-xaui |
- |
3125 |
- |
Mbps |
Differential impedance |
Zo |
80 |
100 |
120 |
Ω |
Differential Input Amplitude |
Vin P-P |
160 |
- |
2000 |
mVpp |
Input Rise/Fall |
TR / TF |
60 |
- |
130 |
ps |
Differential Impedance of Zin |
Zin |
- |
100 |
- |
ohm |
Receiver Specifications – Optical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Input Operating Wavelength |
λ |
1260 |
- |
1600 |
nm |
Received power 1 |
Rpo |
-24 |
- |
-7 |
dBm |
Maximum Input Power |
RX-overload |
-7 |
- |
- |
dBm |
Reflectance |
Rrx |
- |
- |
-27 |
dB |
Receiver Specifications – Electrical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Data Rate (TXLINE0-3) |
RX-xaui |
|
3125 |
|
Mbps |
Supply Voltage |
VccRX |
3.13 |
3.3 |
3.47 |
V |
Differential Output Amplitude |
Vout P-P |
800 |
- |
1600 |
mV |
Rise/Fall Time |
Tr / Tf |
50 |
- |
90 |
ps |
Differential Impedance of Zout |
Zout |
- |
100 |
- |
ohm |
Signal Specifications – Electrical
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
1.2 V CMOS |
|||||
Input High Voltage |
VIL(MAX) |
- |
- |
0.36 |
V |
Input Low Voltage |
VIH(MIN) |
0.84 |
- |
1.25 |
V |
Capacitance |
|
- |
- |
320 |
pF |
Pull Up Resistance |
Rpull |
10k |
- |
22k |
ohm |
MDIO I/O |
|||||
Output Low Voltage |
VOL |
-0.3 |
- |
0.2 |
V |
Output Low Current |
IOL |
- |
- |
4 |
mA |
Input High Voltage |
VIH |
0.84 |
- |
1.5 |
V |
Input Low Voltage |
VIL |
-0.3 |
- |
0.36 |
V |
Pull-up Supply Voltage |
VPULL |
1.14 |
1.2 |
1.26 |
|
Input Capacitance |
CIN |
- |
- |
10 |
Pf |
Load Capacitance |
CLOD |
- |
- |
470 |
Pf |
External Pull-up Resistance |
EPULL |
200 |
- |
- |
Ohm |
Mechanical Dimensions
Ordering Information
Part Number |
Product Description |
SPT-2C47TG-80D |
X2,1470nm 80km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C49TG-80D |
X2,1490nm 80km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C51TG-80D |
X2,1510nm 80km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C53TG-80D |
X2,1530nm 80km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C55TG-80D |
X2,1550nm 80km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C57TG-80D |
X2,1570nm 80km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C59TG-70D |
X2,1590nm 70km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
SPT-2C61TG-70D |
X2,1610nm 70km(ZR), 0ºC ~ 70ºC, Cooled EA-DFB/APD |
E-mail: sales@sopto.com
Web : http://www.sopto.com