SFP GPON OLT Transceiver with single mode SC receptacle

SPGT-P4321-SC2DA

GPON SFP OLT Transceiver

Features
Single Fiber Transceiver with single mode SC receptacle
1490nm continuous-mode transmitter with DFB laser
1310nm burst-mode receiver with APD-TIA
Single 3.3V power supply
Reset burst-mode receiver design
Burst mode signal detect output which is LVTTL compatible.
Burst mode received signal strength indication (RSSI) output
Complies with ITU-T G984.2 Class C+
Digital diagnostic interface compliant with SFF-8472 Rev 9.4
Complies with RoHS directive
Operating case temperature: Standard: 0 to +70°C

Applications
Gigabit Passive Optical Networks (G-PON) – OLT side

Description
The SPGT-P4321-SC2DA GPONN SFP OLT transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal (OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio overall operating temperature range. And it is Class I laser compliant IEC825 and CDRH standards. The receiver has a hermetically packaged burst-mode APD-TIA (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.