Product

Related Products

Short Wavelength SFP/SFP+ Transceiver

3rd-Party Compatible 10GBASE-SR SFP+ Transceiver

Consistent with the original SFP multi-source agreement (MSA), these hot-pluggable transceivers have a common mechanical specification, pinout, and management interface, and connect to duplex serial fiber with "LC" connectors.

SOPTO supports short wavelength sfp and sfp+ transceivers, which are operated in 850nm and are designed for 50µm (50/125) multimode fiber, transmission distance from 150m to 500m, very suitable for short range indoor application.

SOPTO 850nm Short Wavelength SFP/SFP+ transceiver modules are 100% compatible with Cisco, HUWEI, Juniper and other brands that means our products are able to work normally in your equipments.

Tips: SOPTO supplies (Original Equipment Manufacture) OEM Service and Third-Party Compatible Fiber Optic Transceivers.

Compatible Brands

Cisco
Juniper
HP
Intel
DELL
Other mainstream brands

Short Wavelength SFP/SFP+ Transceiver Order information

Part No.	Parameters	Laser	Temperature	Get Price
155M 850nm Short Wavelength SFP Transceiver
SPT-P8503-02(D)	SFP 155M/OC-3/STM-1 2km Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	0~70°C	Email
1.25G 850nm Short Wavelength SFP Transceiver
SPT-P851G-S5	SFP 1.25G 550m Multi-mode Fiber(MMF) 850nm Dual LC Connector	VCSEL	0~70°C; -20~85°C	Email
2.125G 850nm Short Wavelength SFP Transceiver
SPT-P852G-S3(D)	SFP 2.125G 300m Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	Standard : 0 ~ +70°C; Extended : -20 ~ +85°C	Email
3G 850nm Short Wavelength SFP Transceiver
SPT-P853G-S5D	SFP 3G 500m Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	Standard: 0 ~ +70°C; Industrial: -40 ~ +85°C	Email
4.25G 850nm Short Wavelength SFP Transceiver
SPT-P854G-S5(D)	SFP 4.25G 500m Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	Standard : 0 ~ +70°C; Industrial : -40 ~ +85°C	Email
SPT-P854G-S3(D)	SFP 4.25G 300m Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	Standard : 0 ~ +70°C; Industrial : -40 ~+85°C	Email
6G 850nm Short Wavelength SFP+ Transceiver
8.5G 850nm Short Wavelength SFP+ Transceiver
SPT-P858G-SR	SFP+ 8.5G 150m Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	0~70°C	Email
10GBASE-SR 850nm Short Wavelength SFP+ Transceiver
SPT-SFP+-SR	SFP+ 10G 300m Multi-mode Fiber (MMF) 850nm Dual LC Connector	VCSEL	0~70°C	Email

Short Wavelength SFP/SFP+ Transceiver Features

Support 155M to 10.5Gpb/s bit rates
Electrical interface compliant to SFF-8431
Laser Safety: Class 1 Laser Product (no biological)
Hot Pluggable SFP/SFP+ footprint
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Duplex LC Connector
Operating case temperature:
Standard: 0~70℃
Extended:-20~85℃
Industrial: -40~85℃
Storage: 0 to 70℃
Low power consumption, less than 1W typical
Weight: 20g(0.044 lb)
All-metal housing for superior EMI performance
Reduction of Hazardous Substances: RoHS-compliant lead-fredd (RoHS-6)

Short Wavelength SFP/SFP+ Transceiver Application

10GBASE-SR at 10.3125Gbps
10GBASE-SW at 9.953Gbps
Other optical links
8G/10G Fibre Channel Network
6G CPRI/OBSAI/LTE Network
155M to 3G Transmission Network

Superiority

low price
1-3 Years Warranty
Standarized Design
High-quality raw materials
A Wide range of selection and large stock
Rigorous and comprehensive product testing
Widely compatible with all brand equipment

Third Party Compatible Service

The SFP transceiver is not standardized by any official standards body, but rather is specified by a multi-source agreement (MSA) among competing manufacturers.

As a practical matter, some networking equipment manufacturers engage in vendor lock-in practices whereby they deliberately break compatibility with "generic" SFPs by adding a check in the device's firmware that will enable only the vendor's own modules.

For example, in 2003 during a routine Internet Operating System (IOS) update on their Catalyst line of switches, Cisco added a feature that would cause the switch to reject optical modules that were not deemed ‘Cisco brand.

Sopto is a professional manufacture and supplier of fiber optic transceivers. All our optical transceivers are tested strictly before delivery and fully compatible with major bands’ equipment.

Sopto provides GBIC, SFP, SFP+, X2, XENPAK, XFP and QSFP+ transceivers, supporting different data rate such as 1G, 2G, 4G, 8G, 10G, 40G, etc. These transceivers can be operated with network switches, routers, firewalls, digital return transceivers and other devices of all leading vendors, such as Cisco, HP, Juniper, H3C, 3COM, D-link, etc.

As a third party vendor, Sopto can supply transceiver modules with good quality and low price for our customers.

CISCO

ADTRAN

H3C

Allied Telesis

Alcatel-Lucent

Foundry

Force10

Juniper

Intel

Brocade

Blade

D-Link

Linksys

Marconi

McAfee

Netgear

Ruijie

SMC

Emulex

Q-logic

SUN

Feixun

Fiber Optic Transceiver Customized Example-OEM

What is OEM?

OEM stands for Original Equipment Manufacturer, refers to companies that make products for others to repackage and sell. OEMs are manufactures who resell another company’s products under their own name and branding.

Sopto Provides OEM Service

Sopto can provide OEM service for our customers. All our optical transceivers are produced by our own factory and 100% compatible with Cisco, HP and other brands’ devices. We also provide customize optical transceivers to fit your specific requirements with high quality and low price. If you need OEM service, please give priority to our products. For more information, please contact our sales staff on-line by e-mail or live-chat. Please call us at 0086-755-23018340 or email to sales@sopto.com

Customized Example
Logo	Model	SN Code	Compatible Brand	Package
	SPT-XXXX-XX	SPXXXXXXXXX	CISCO	Package with logo
Sopto provides customized service. Tell us your requirement on logo,model,SN code,compatible brand and package.

Email us

Connecting the world with professional Fiber Optic Solutions