- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
- 1
- 2
- 3
OC3/STM1 SFP Transceiver
The SOPTO industry-standard Small Form-Factor Pluggable Interface Converter (SFP) for packet-over-SONET/SDH (POS), optical networking, and ATM applications are hot-swappable optical interfaces that can be plugged into a variety of ports on Cisco/HUAEI/Juniper and other mainstream router interfaces. OC3/STM1 SFP transceiver is a high performance, cost effective module that provides full-duplex 155Mbps connectivity between switches.
SOPTO SFP optics for POS and ATM applications plug into a variety of SFP-based POS, TDM and ATM interfaces. The SFPs are compatible with the SONET/SDH and ATM standards, and support the digital diagnostic functions specified in the SFF-8742 Multi-Source Agreement (MSA) and the extended operating temperature range from 23 to185°F (-5 to 85°C).
Sopto’s SPT-P3103-02(D), SPT-P1303-20D, SPT-P1303-40D and SPT-P1503-80D modules are OC3/STM1 SFP modules with duplex LC optical interface. We can also provide DDM functions for your equipment if you need. And these 100BASE SFP transceiver modules are 100% compatible with your branding devices.
Tips: SOPTO supplies (Original Equipment Manufacture) OEM Service and Third-Party Compatible Fiber Optic Transceivers.
Compatible Brands
Cisco
Juniper
HP
Intel
DELL
Other mainstream brands
OC3/STM1 SFP Order information
| Part No. | Parameters | Laser | Temperature | Get Price | |
| SOPTO 155M OC3/STM1 SFP Transceiver | |||||
| SPT-P8503-02(D) | SFP 155M/OC-3/STM-1 2km Multi-mode Fiber (MMF) 850nm Dual LC Connector | VCSEL | 0~70°C | ||
| SPT-P3103-02(D) | SFP 155M/ OC-3/STM-1 2km Multi-mode Fiber (MMF) 1310nm Dual LC Connector | FP | 0~70°C | ||
| SPT-P1503-80(D) | SFP 155M/ OC-3/STM-1 80km Single Mode Fiber (SMF) 1550nm Dual LC Connector | DFB | Standard:0~70°C; Extended:-20~85°C | ||
| SPT-P1503-120D | SFP 155M/OC-3/STM-1 120km Single Mode Fiber (SMF) 1550nm Dual LC Connector | DFB | Standard: 0~70°C; Industrial: -40~85°C | ||
| SPT-P1303-40(D) | SFP 155M/ OC-3/STM-1 40km Single Mode Fiber (SMF) 1310nm Dual LC Connector | FP | Standard:0~70°C; Industrial:-40~85°C | ||
| SPT-P1303-20(D) | SFP 155M/ OC-3/STM-1 20km Single Mode Fiber (SMF) 1310nm Dual LC Connector | FP | 0~70°C; -40~85°C | ||
OC3/STM1 SFP Features
Up to 155M data-rate
Duplex LC receptacle optical interface
Digital Diagnostic Monitoring: Internal Calibration or External Calibration
Compliant with SFP MSA and SFF-8472
Compatible with RoHS
+3.3V single power supply
Operating case temperature: Standard: 0 to +70°C
OC3/STM1 SFP Application
SDH STM-1, S-1.1, L-1.1, L-1.2
SONET OC-3 IR1, LR1, LR2
Fast Ethernet
Other optical links
Superiority
- low price
- 1-3 Years Warranty
- Standarized Design
- High-quality raw materials
- A Wide range of selection and large stock
- Rigorous and comprehensive product testing
- Widely compatible with all brand equipment
Third Party Compatible Service
The SFP transceiver is not standardized by any official standards body, but rather is specified by a multi-source agreement (MSA) among competing manufacturers.
As a practical matter, some networking equipment manufacturers engage in vendor lock-in practices whereby they deliberately break compatibility with "generic" SFPs by adding a check in the device's firmware that will enable only the vendor's own modules.
For example, in 2003 during a routine Internet Operating System (IOS) update on their Catalyst line of switches, Cisco added a feature that would cause the switch to reject optical modules that were not deemed ‘Cisco brand.
Sopto is a professional manufacture and supplier of fiber optic transceivers. All our optical transceivers are tested strictly before delivery and fully compatible with major bands’ equipment.
Sopto provides GBIC, SFP, SFP+, X2, XENPAK, XFP and QSFP+ transceivers, supporting different data rate such as 1G, 2G, 4G, 8G, 10G, 40G, etc. These transceivers can be operated with network switches, routers, firewalls, digital return transceivers and other devices of all leading vendors, such as Cisco, HP, Juniper, H3C, 3COM, D-link, etc.
As a third party vendor, Sopto can supply transceiver modules with good quality and low price for our customers.
Fiber Optic Transceiver Customized Example-OEM
What is OEM?
OEM stands for Original Equipment Manufacturer, refers to companies that make products for others to repackage and sell. OEMs are manufactures who resell another company’s products under their own name and branding.
Sopto Provides OEM Service
Sopto can provide OEM service for our customers. All our optical transceivers are produced by our own factory and 100% compatible with Cisco, HP and other brands’ devices. We also provide customize optical transceivers to fit your specific requirements with high quality and low price. If you need OEM service, please give priority to our products. For more information, please contact our sales staff on-line by e-mail or live-chat. Please call us at 0086-755-23018340 or email to sales@sopto.com
| Customized Example | ||||
| Logo | Model | SN Code | Compatible Brand | Package |
 | SPT-XXXX-XX | SPXXXXXXXXX | CISCO | Package with logo |
| Sopto provides customized service. Tell us your requirement on logo,model,SN code,compatible brand and package. | ||||