SPT-P136G-10

Parmeters

• Form Factor : SFP+
• Manufacture : Sopto
• Data Rate : 6.25G
• Place of Origin : Shenzhen, China
• Transmission distance : 10km
• Fiber Mode : Single Mode Fiber (SMF)
• Wavelength : 1310nm
• Types of Interface : LC
• Types of Laser : DFB
• Operating Temperature : Standard: -5 to +70℃ Industrial : -40 to +85℃
• Modes of Communications : Duplex
• Power Supply : + 3.3V Single power supply
• Model : SPT-P136G-10(T)
• Operating Humidity : 0%~90% RH no condensing
• Extinction Ratio : 3.5~6dB
• Receiver Sensitivity : -24~-11.1dBm
• Saturated Optical Power : -3dBm
• Hot Pluggable Times : >=200
• Warranty : 1-3 Years
• Power Consumption : <2W

Specifications

Support Multi Rate up to 6.25Gbps
CPRI/OBSAI Compatible Optical Interface
Hot Pluggable SFP+ footprint
1310nm DFB transmitter, PIN photo-detector
Transmission distance up to 10km on 9/125μm SMF
Digital Status monitoring Interface
RoHS compliant and Lead Free
Metal enclosure for lower EMI
Power dissipation <1W
Compliant with FC-PI-4 800-Mx-SN-I, SFF-8431 , SFF-8432 and SFF-8472
Operating case temperature:Standard: -5 to +70℃，Industrial : -40 to +85℃

Testing Standards

Meet ISO9001, TUV, CE, FCC, CAS, UL and RoHS certificates

Application

Radio Base Station
CPRI or OBSAI rates:614.4Mb/s,1228.8Mb/s,1536Mb/s,2457.6Mb/s,3072Mb/s,4915.2Mb/s,6144Mb/s
LTE optical repeater application

Description

SPT-P136G-10 is a high performance, cost effective modules, which is supporting Multi Rate 1.25-6.25Gbps and transmission distance up to 10km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm DFB driver and re-timer. The receiver section consists of a PIN photodiode integrated with a Trans impedance preamplifier (TIA). The module is hot pluggable into the 20-pin connector. The high-speed electrical interface is based on low voltage logic, with nominal 100 Ohms differential impedance and AC coupled in the module.