- Fiber Optic Transceiver Module
- High Speed Cable
- Fiber Optical Cable
- Fiber Optical Patch Cords
- Splitter CWDM DWDM
- PON Solution
- FTTH Box ODF Closure
- PCI-E Network Card
- Network Cables
- Fiber Optical Adapter
- Fiber Optical Attenuator
- Fiber Media Converter
- PDH Multiplexers
- Protocol Converter
- Digital Video Multiplexer
- Fiber Optical Tools
- Compatible
SPT-QSFP+-SR4
Parmeters
- Form Factor : QSFP+ SR
- Manufacture : Sopto
- Data Rate : 40G
- Place of Origin : Shenzhen, China
- Transmission distance : 100m on OM3, 150m on OM4
- Fiber Mode : Multimode Mode Fiber (MMF)
- Wavelength : 850nm
- Types of Interface : MPO Connector
- Types of Laser : VCSEL
- Operating Temperature : 0~70°C; -40~85°C
- Modes of Communications : Duplex
- Power Supply : + 3.3V Single
- Model : SPT-QSFP+-SR4
- Operating Humidity : 0%~90% RH no condensing
- Extinction Ratio : 3.5~17dB
- Receiver Sensitivity : <-11.5dBm
- Saturated Optical Power : -3dBm
- Hot Pluggable Times : >=200
- Warranty : 1-3 Years
- Power Consumption : <1.5W
Specifications
Four-channel full-duplex transceiver modules
Transmission data rate up to 10.3Gbit/s per channel
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Housing isolated from connector ground
RoHS 6 compliant
Hot Pluggable QSFP form factor
Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
Single MPO connector receptacle
Built-in digital diagnostic functions
Testing Standards
All of our 40gBase-SR4 qsfp+ Transceivers are compliant with ISO9001, TUV, CE, FCC, CAS, UL and RoHS certifications.
Application
40GBASE-SR4 40G Ethernet
Dotcom/Telecom switch & router connections
Data Aggregation and Backplane Applications
Proprietary Protocol and Density Applications
Description
SPT-QSFP+-SR4 is a Four-Channel, Pluggable and Parallel Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. It integrates four data lanes in each direction with 40Gbps bandwidth. Each lane can operate at 10.3125Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm.