FTTH Knowledge

SOPTO SPT-ONU-404H is a GEPON Optical Network Unit (ONU) equipped with one GEPON port, one Gigabit and one Fast Ethernet RJ-45 interface.

Nowadays the voice, video, and data networks are becoming more complex and requiring more bandwidth and faster transmission rates over ever increasing distances. To fulfill these demands, network managers are relying more about fiber optics.

Last Mile Transmission Solution mainly includes 4 different kinds of technology such as ADSL2+, VDSL2, GEPON, and Fiber for various applications.

Advancement of technology answered many difficult queries inside a second. Multiplexer and demultiplexer (Mux Demux) may be the one that is a sophisticated creation that can help in transferring the data extremely fast

EPON is based on long-distance optical fiber transmission network Ethernet access technology. EPON uses multipoint architecture, an optical fiber carrying data signals down the line..

Fiber in the loop is a system implementing or upgrading portions of the PSTN network Local loop with Optical Fiber technology from the Telephone Exchange of a telephone carrier to a remote Serving Area Interface (SAI) located in a neighborhood or to an Op

Between the OLT and ONU EPON, there is a single optical fiber to provide symmetric 1.25Gbps bandwidth limitations by physical interface, the actual provision of 1Gbps bandwidth to transmit data, voice and video services.

The feeder cabling will eventually need to convert to smaller distribution cables. This is achieved at the first point of flexibility within the FTTH network, which can be generally termed the Primary Fiber Concentration Point (FCP).

ADSL After several years of vigorous development has become China's most popular fixed-line operators in broadband access means.

A number of factors are increasing the interest among telecommunications providers in offering the “triple play” services of voice, video and high-speed data access. Most importantly, subscribers are finding a growing number of applications that drive the

If economic success is to be achieved and progress realized, then we must all be sensitive to environmental and social as well as commercial demands.

While fiber-to-the-home broadband is growing in the United States, many countries around the world are far more advanced in building their FTTH broadband connections network.

EPON (Ethernet Passive Optical Networks) or GEPON (Gigabit Ethernet Passive Optical Networks), also known as Ethernet PON is an IEEE/EFM standard for using Ethernet for packet data, as defined in IEEE 802.3ah.

In this page, we only describes the passive infrastructure, it will not go into any depth on architecture.

Deploying FTTH requires technicians to master new terminology, technology and testing procedures to ensure that services are correctly provisioned and installed. This process can be expedited if technicians have a single instrument that can perform all re

In certain cases, the fibers may need to be broken down at a second fiber concentration point within the FTTH network before final connection to the subscriber. As with the primary FCP, this second point also needs to be a point of flexibility allowing fa

Besides technical performance, economic considerations play a key role in deciding for a particular architecture. The duct pattern may be the same for all three architectures (point to point, active star and passive star).

The Access Node, often referred to as the Point of Presence (POP), acts as the starting point for the optical fibre path to the subscribing customer.

The deployment of fibre closer to the subscriber base will require that consideration be given to infrastructure deployment on public and private land, and also within public and private properties.

The Visual Fault Locator (VFL) is an essential tool for every fiber optic tool kit; it is like the continuity tester. The VFL is not one of the least expensive tools in your tool kit.