Patch Cord Knowledge

To introduce two Important Kinds of Fiber Attenuators. If you are interested in our fiber optic attenuators, please contact us.

OM1 Duplex fiber has a significantly higher bandwidth advantage for extended reach 1Gb/s and 10 Gb/s applications...

An armored fiber patch cable indicates a fiber optic patch cable with stainless armor inside the cable jacket to protect the central unit of the cable. For more special features of armored fiber optic patch cables, please read on.

Fiber optic attenuators are used in applications where the optical signal is too strong and needs to be reduced...

This article describes the difference between Cat6 and Cat6a from performance, crosstalk prevention, size as well as other physical properties.

Fiber optic adapters are used in fiber optic connection. The typical use is to provide a cable to cable fiber connection. People sometimes also name them to be mating sleeves and hybrid adaptors..

Which Fiber Optic Connector Should You Use? On this issue, we talk about some common problem of fiber optic connectors which may contact to you.

General types of fiber optic adapters we talk about here include FC, SC, ST, LC, MT-RJ, MU, MPO, E2000 and DIN Fiber Optic Adapters...

ODC connectors are designed for the fiber to antenna (FTTA) applications. ODC fiber optic connector can withstand harsh environmental conditions when being used in outdoor applications.

Fiber optic patch cable, often called fiber optic patch cord or fiber jumper cable, is a fiber optic cable terminated with fiber optic connectors on both ends.

With the rapid deployment of high speed fiber multiplexer, the possibility of having an un-terminated derived channel or branch increases. The single fiber connector mated to an unused adapter or coupling is the source of back-reflection.

Fiber optic patch cable can take many forms. Here's a look at some of the most common. Simplex and zip cord cables consist of one or two fibers that have been tight-buffered and Kevlar-reinforced and jacketed.

As fiber cable network is built by drawing the long lines of physical cables, it is highly impossible to lay a continuous cable end-to-end.

Larger diameter multimode fiber, different wavelengths and phase of the beam reflected along the fiber wall kept forward transmission, resulting in dispersion...

Multimode Patch cords are used to connect high speed and legacy networks like Gigabit Ethernet, Fast Ethernet and Ethernet. Multimode Patch cords are conformed to IEC, EIA TIA and Telcordia standards.

When might fiber optic cables have to be spliced? There are five following predicament.

Data center fiber optical transmission system requirements on the bandwidth shows high growth trend, while the use of a new generation of fiber optic and fiber optical module can continue to explore the potential of optical network bandwidth.

Cat5E Patch Cables are the enhanced version of Category 5 Patch Cables, and go along the same lines as basic Cat5 network cables. The difference between the two is that Cat 5e network cables fulfill higher standards of data transmission.

Fiber optic splitter is used to split the fiber optic light into several parts at a certain ratio. We use fiber optic splitter to distribute or combine optical signals in many applications, such as FTTH solution, etc

Fiber Patch Cable also known as fiber jumper or fiber patch cord, which is a fiber optic cable terminated with fiber optic connectors on both ends.