How To Use Bare Fiber Adapter

 1) Strip the outer jacket to about 3 inches 2) Strip the buffer coating leaving about 2 inches of fiber exposed 3) Score and Cleave the fiber, leaving 0.5 inches bare fiber exposed. 4) Once it is cleaved, clean the fiber with Isopropyl alcohol and Kim wipes. 5) Press the clamp button on the bare fiber adapter. Insert the cleaved fiber in the rear of the housing until the glass is flush with the end of the ferrule. Release the clamp button, securing it in place.

Related:

cwdm Fiber Optic Transceiver Module

buy fiber optic cable

fiber optic transceivers

RECOMMENDED PRODUCTS

GO SHOPPING FOR FTTH BOX ODF CLOSURE